• B,37/181 B1-Birdopur, Varanasi-221010

Our Products

Biomass Gasifier
Electrical Mode

Agropower Gasification Plant Pvt. Limited, Electrical power generation from renewable energy sources is considered a promising option for self sustained growth with almost no impact on environment. In this regard, harnessing energy from biomass which is a indigenous substitute for the imported petroleum was investigated experimentally. Wood pieces were converted to producer gas by a thermo-chemical process called gasification. This low heating value gas was cooled and cleaned before supplying to the engine coupled to an electrical generator. The engine was run in dual fuel mode using producer gas as primary fuel and diesel as pilot fuel. The gasifier-engine-generator system was tested at various electrical loads from 0 kW to 2.7 kW. The maximum diesel replacement percentage achieved was about 78 %. If the fuel supply system is improved further, then the diesel replacement percentage can be expected to increase.

Biomass Gasifier
Thermal Mode

Thermal energy of the order of 5 MJ is released, by flaring 1 m3 of producer gas in the burner. Flame temperatures as high as 1550 K can be obtained by optimal pre-mixing of air with gas. For applications which require thermal energy, gasifiers can be a good option as a gas generator, and retrofitted with existing devices. An appropriate site to realise the above application is an unelectrified village or hamlet. The benefits derived from this could be many, right from irrigation of fields to the supply of drinking water, and illuminating the village to supporting village industries. The other suitable sites could be saw mills and coffee plantations, where waste wood (of course of specified size) could be used as a feed stock in gasifiers.

Rice Mill Machinery

We also sell diffrent and parts and type of rice mill. Rice is a staple food in most of the countries in the world. The rice farmers grow, sell the rice and use it as the major daily food source.Rice milling business has been around for a long time. Especially in countries where rice farming is their major source of income. According to reports, the middle east is the leading import and export region. This account for 35% of world’s rice imports and about 75% of total exports. However, rice milling business is one of the business in the agriculture that grows fast and help in economic development.This is the step in the post production of rice that involves the removal of husk and bran layers, which produce rice that can be edible free of impurities.The rice comprises of about 20% of husk and 11% bran layers, which leaves you with about 69% edible rice free from impurities.Want to start a rice milling business? Do you want to invest in rice milling business? If your answer is yes, read on. In this article, you’ll have a complete overview on how to start and run rice mill business.

Paddy Cleaner

Agropower Gasification Plant Pvt. Limited, This machine is made of high grade all steel construction with robust stand and equipped with component makes it help you get rid of chaffs, straws, weed seeds, dust and other light impurities including husk etc in an effective manner. The seed grader features pre-aspiration and final aspiration with three easily and rapidly changeable screens - one for Scalping, one for Cleaning and one for Grading. There is Nylon Brush cleaning device for cleaning the cleaning and grading screens.This machine works on electricity as well as manually. When there is no electricity cleaning and grading can be done manually at any time required.

Paddy Dryer

The rice grain is susceptible to cracking only below critical moisture content, where, if the drying rate is too fast it becomes a serious source of cracking. Moisture evaporates only from the surface; so the moisture from the inner layer first diffuses to the surface and then it evaporates. This process therefore sets up a steep moisture gradient in the grain, as the surface being excessively dry and the core still wet, this results in moisture stress and the grain releases the stress by cracking.KILBURN has devised a system to properly dry the grain to the desired moisture by way of gentle handling. The recommended combination for Drying Parboiled Paddy is : KILBURN VFBD + Column Dryer.

Paddy Parboiling System

Agropower Gasification Plant Pvt. Limited, Drying should be done 12 to 14 percent moisture for safe storage and milling. Parboiled rice is more difficult to dry and requires energy than field paddy because its moisture content is much higher, however, higher air temperature help reduce the drying time. Most parboiled paddy is sun-dried on large drying floors by large number of people who are required to constantly turn and mix the paddy to achieve rapid, uniform drying. In contrast with field paddy, Nagraj Driers helps to dry parboiled paddy,it requires air temperatures of up to 100 C during the first drying period. During the second period air temperature should be kept below 75 C. Moisture reduction takes place rapidly during the first part of drying from 36 to 18 per cent moisture level, but is slow from 18 to 14 per cent. The drying temperatures also may varies depends upon the type of paddy.Process for Hot soaking Method Cont.. Steam for 1 to 2 min after emergence of steam on top Quick discharge of steamed paddy from steaming tank to cooler Dry the paddy in Drier Unload the paddy to Storage bin / Milling Section If 5 – 10 tones soaking tank, steam the soaked paddy in steaming vessel of capacity 0.5 to 1.0 tone / continuous steaming vessel kept below the soaking tank Number of tanks matching the drier capacity Circulatory/fludised bed type cooler IBR Boiler


InAgropower Gasification Plant Pvt. Limited, Generators produce almost all of the electricity used by people. They supply the electric power that runs machines in factories, provide lighting, and operate appliances in the home. There are two main types of generators - alternating-current (AC) generators (sometimes called alternators) and direct-current (DC) generators (also known as dynamos). Both types of generator work on the same principles.How A Generator Works (Basic Principles)A generator does not create energy - "energy cannot be created or destroyed, only changed from one form to another" (Sir Isaac Newton). A generator changes mechanical energy into electric energy. Every generator must be driven by a machine that produces mechanic energy. For example, the large generators that provide electricity to Lae and the rest of PNG are driven by hydro power. The mechanical device that powers a generator is known as a prime mover. To obtain more electrical energy from a generator, the prime mover must supply more mechanical energy.Generators produce electricity by means of a principle discovered independently by two physicists in 1831 - Michael Faraday of England and Joseph Henry of the United States. Faraday and Henry found that they could produce electricity in a coil of copper wire by moving the coil near a magnet. This process is called electromagnetic induction.A simple generator (see Figure 1 below) consists of a single loop of wire turning in a magnetic field. Electricity is produced only while the loop is rotating. As the loop rotates, the two sides "cut" the magnetic lines of force.